How Much Weight Does it Take to Break a Barbell? Testing to Destruction with SOLIDWORKS Simulation

MODELLING A BARBELL IN SOLIDWORKS

Barbells are a great model for beginner and intermediate SOLIDWORKS users to practise with.

The main bar is created from a single sketch revolved around a centreline.

A second sketch is used to add the split line for the grip detail.

This single bar is actually all we need to model to find out the answers to our questions and run this simulation in SOLIDWORKS.

But if you want to add more detail and make it instantly recognisable, use multibody part modelling to add weights and collars to either end.

This gives us a complete cut list or bill of materials, and enhances the realism of our model so we can also practise producing realistic renders with SOLIDWORKS Visualize.

WHAT ARE BARBELLS MADE OF?

Whenever you’re modelling in SOLIDWORKS, it helps to know what material it is made from.

This is especially true if you want any form of accurate simulation in SOLIDWORKS.

A barbell has to hold a significant amount of varying weight, so they must be strong and durable, whilst also being flexible enough to withstand repetitive stress over long periods of time.

Typically, the bar of a barbell is made from steel that gets polished and knurled before being coated to protect from oxidation over time.

Our SOLIDWORKS model needs to reflect that, so we’ll add the Cast Carbon Steel material to our part from the FeatureManager tree.

Full Setup Tutorial

To learn how to set up your study in the same way, follow along with our webinar where we run you through several scenarios for calculating displacements and stresses.

Discover how easy it is to get results quickly with SOLIDWORKS Simulation or utilise our experienced Simulation consultants to get the job done for you.

HOW TO TEST DESIGNS IN SOLIDWORKS

SOLIDWORKS Premium and SOLIDWORKS Simulation are great tools for evaluating static loading scenarios.

The virtual testing environment provided lets engineers and designers quickly test, validate, and optimise the performance of designs under representative, real-world conditions.

By using finite element analysis (FEA), SOLIDWORKS Simulation can predict how products will behave under various loads, so we can ensure that they meet safety and performance standards before manufacturing.

We set up this study to take a remote load equal to a hefty load of 200kg - that’s 100kg on either end.

We’ll make sure we follow the typical SOLIDWORKS Simulation workflow established on our training courses to give us an accurate result:

1. Assign a Material: assign the appropriate material properties to the model. SOLIDWORKS comes with a vast library of materials by default. Remember to apply the material in the study too!
2. Define Fixtures: select geometry to restrain and set degrees of freedom.
3. Add Loads: define the loading conditions that the product will be subjected to. This includes the maximum weight it needs to hold and the dynamic loads from repetitive lifting.
4. Create a Mesh: generate a mesh for the model. The mesh should be fine enough to capture the stress concentrations but optimised to reduce computational load.
5. Run the Study: perform the simulation to analyse stress distribution, deformation, and safety factors.

Our fine mesh gives us the most accurate results, but can take a little longer to run. We’ve asked SOLIDWORKS to give us displacement, strain, and stress plots for the loading scenario.

We’ll pay special attention to areas where stress concentrations are likely, such as the central part of the bar and the areas near the collars with mesh refinement if needed.

INTERPRETING SIMULATION RESULTS

It’s important to remember, that much like a calculator, SOLIDWORKS will only return the results of what the user inputted.

It is up to the user to interpret the results and determine the suitability of the design.

Charts can be modified in the options so that any area shown in red on a plot has yielded, meaning that the design is not suitable and must be re-evaluated.

Plots can be displayed by right clicking on a result in the Simulation Feature Tree and selecting Show. The simulation results show the distribution of stress along the barbell and highlight critical points that may need reinforcement.

For instance, if the stress near the collars exceeds the material's yield strength, the design may need to be adjusted, such as increasing the diameter of the bar or using a higher-strength material.

We can also view the displacement and see that this load will cause the bar to flex by 42 mm at its extremities.

With SOLIDWORKS Simulation Professional, we can utilise design optimisation to change various dimensions and factors to settle on the best configuration for the scenario.

HOW MUCH WEIGHT IS TOO MUCH?

It greatly depends on what material a product is made from as to how much load will cause yielding.

The material yield strength and the diameter of the bar are the two of the most significant factors in this scenario.

When made from cast carbon steel, 200 kg is too much for our bar, yielding at a measly 248 MPa.

However, if we use alloy stainless steel, then our bar successfully holds 200 kg, and won’t yield until 620 MPa of stress is induced! This seems like a more suitable material choice.

CAN SOLIDWORKS DO STATIC SIMULATION?

By now you can see that SOLIDWORKS is a clear and intuitive tool for solving FEA simulation problems.

Calculating static stresses is straightforward with SOLIDWORKS and that means that you can enhance safety, reduce material and costs, while optimising designs for performance.

By simulating the maximum loads and stress points, we can ensure that designs are safe for use, preventing potential accidents and injuries.

Identifying design flaws and optimising the design before we manufacture it reduces the cost of prototyping and material waste, and by using SOLIDWORKS Simulation, we fine-tune the barbell's design to ensure it complies with standards and functions correctly under the intended loads.

Whether you're a manufacturer aiming to produce high-quality barbells or a fitness enthusiast curious about the safety of your equipment, understanding the capabilities and limitations of your gear through SOLIDWORKS Simulation is invaluable.